16" inch Universal Slim Fan Push Pull Electric Radiator Cooling 12V 160W Mount Kit

➤Universal Slim Fan Push Pull Electric Radiator Cooling Mount Kit:

This is a great electric fan fits for radiators, oil coolers, transmission coolers, condensers and more. These powerful electric fans work with 12-volt electrical systems and draw 15 Amps, depending on the size. We have size : 12", 14", 16", and different colors to choose from.

■12" Fan Maximum CFM: 1800 CFM

■14 " Fan Maximum CFM: 2400 CFM

■16 " Fan Maximum CFM: 3000 CFM

➤Fitment:

It's a universal fit cooling fan.Make sure the fan size is correct with your original.

➤WIDE USE:

Universal radiator cooling fan fit various vehicles and engines. It depends on the size of your radiator. Auxiliary equipment for cooling the entire engine compartment, including radiators, air

➤How to choose the right fan size？

●Step 1:Confirm the width and depth of your radiator

●Step 2:Compare the fan diameter and depth with radiator

●Step 3: Choose the right size fan

➤Installation:

●Step 1: Open the hood of the car and remove the intake pipe above the cooling fan, so that the cooling fan can be removed smoothly.

●Step 2: The cooling fan and the air conditioning fan are located above the fan frame, with a total of four corners, one screw at each corner. Use a professional tool to unscrew the four screws. When the screws are all unscrewed, we can remove the cooling fan from the car.

●Step 3: Install the new cooling fan correctly on the new fan frame, and tighten and secure the four screws at the four corners.

●Step 4: Start the engine test and the fan can run normally. After checking the error, install the intake pipe to the correct position.

●Step 5: Tighten the fixing screws of the intake pipe, close the hood, and test to ensure that the new radiator fan is working properly and all operations are completed.

➤Mode Introduction:

★PUSHER MODE

Pusher fans mount on the grill side (front) of the radiator core and push air through the radiator core. Fresh airflow enters through the grille, then is pushed through the radiator core, and exits out the back side of the radiator. Pusher fans are used typically where is a limited amount of space for a properly sized puller fan.

★PULLER MODE

Puller fans mount on the engine side (back) of the radiator core and pull air through the radiator core. The fresh airflow is pulled through the grill then pulled through the core and exits out the back side of the radiator. Puller fans are the desired and most common way of mounting a fan when space is not a limitation between the front of the engine and the back of the radiator core.